Description
TENDA OUTDOOR CPE SYSTEM SPECIFICATION
- Frequency Range 2.4GHz
- Compliant Standards IEEE 802.11b/g/n
- Maximum Wireless Rate 300Mbps
- Interfaces 1*10/100Mbps Ethernet Port
- Antenna Polarization Dual Polarization
- Antennas Gain 8dbi
- Antenna Beam width Horizontal: 60° Vertical: 60°
- GND /
- Reset Button 1*Reset Button
- Power Consumption 2.6W
- Waterproof Level IP65
- LED Indicator PoE/LAN,WiFi, LED1,LED2,LED3
- Power Method 9V0.6A Passive PoE 9V0.6A DC
- Lightning Protection /
- Passive PoE Passive power over ethenet via PoE/LAN (+4,5pins
-7,8pins),Voltage range: 9-13.8V DC - Reception Sensitivity 11b 1Mbps -92dBm±1.5dBm,11n MCS0: -92±1.5dBm.11n MCS7: -72±1.5dBm
- TDMA /
- Operating mode AP/Station/WISP
- Enable/Disable Wireless Radio Support
- SSID Hidden Support
- Wireless Client isolation Support
- SSID Isolation Support
- Channel Bandwidth 0/40MHz
- Channel Shift /
- Wireless Access Control Support
- Weak Signal Client Limitation Support
- Transmission Power Adjustable power by 1dBm
- WMM Capable Support
- APSD Capable Support
- Wireless Security 64/128 WEP,WPA-PSK,WPA2-PSK,WPA&WPA2-PSK,WPA,WPA2
- Transparent Bridge Support
- VLAN Tagging for SSID Support
- DHCP Server Support
- VPN Pass-Through PPTP,L2TP
- Remote Web access Support
- Schedule Reboot Support
- Page Timeout Support
- Ping Watchdog Support
- Dyndns noip, dyndns.org
- Network Diagnoses Ping, Traceroute, Signal Scan
- Time Support
- Firmware upgrade Support
- Backup/Restore Configuration Support
- Username Managerment Support
- System Logs Support
- Managed By Controller PC Software CPE Assistant
- Operation Temperature -30℃ ~55 ℃
- Storage Temperature -40℃ ~ 70℃
- Operating Humidity 10%~90% non-condensing
- Storage Humidity 10%~90% non-condensing
- Default login IP 192.168.2.1
- Default Login Username admin
- Default Login Password admin
- Certification FCC/CE/RoHS
